Since most all septic systems experience problems over time, knowing how to eliminate such septic problems will help save you time and money in the long run. Here you will find a brief breakdown of many of the current treatment options and how they might assist in fixing your septic problems.
The most popular treatment used for almost all septic problems would be bacteria and enzyme based products. Bacteria products are designed to break down sludge and waste and turn it into water and gases. Allowing them to leech beyond your drainage system and back into the water table deep below your property. Bacteria create enzymes which predigest the organics to allow for faster consumption by the bacteria. This cycle is aggressive and waste degradation and is by far the most popular method used nationwide to remediate septic problems.
Using chemicals are alternate treatments that have lost favor over the years due to their detrimental effects on the environment and the septic system itself. These harsh chemicals are introduced to your system to attempt to burn up or dissolve clog areas in your lateral or leach lines. These chemicals can burn skin in seconds and is highly corrosive to the components that make up your septic system. These chemicals are from use in septic systems in some areas.
Hydro jetting is another treatment that forces high pressure water through your drainage area in order to flush out clogs. While hydro jetting has had limited success, the potential damaging effects of blasting high pressure liquid through clay tile beds or fragile systems has deterred many plumbing professionals from its use.
Ground aeration of the field is another method yielding limited results. Here, air is injected into the subsoil surrounding your system in hopes of creating more cavities for liquid to pass. While the method is sometimes effective at eliminating drainage problems, the results are often times temporary. Some states have banned this type of treatment due to concerns over groundwater and well contamination.
Overall, bacteria are the safest and most effective problem solvers available for use in septic tanks, drainage areas and cesspools. The bacteria are harmless to the environment and can efficiently break down clog causing waste at accelerated rates compared to non treated systems. Bacteria multiply rapidly and remain readily available to guard against recurring clogs. There are a multitude of manufacturers who distribute bacteria for septic problems and drainage issues. When selecting a bacteria product, go with a commercial grade septic maintenance and shock treatment such as NT-MAX septic tank maintenance and shock treatment. Remember, the stronger the bacteria, the better chance you have at fixing the septic problem.